APAGAR PU SEALANT

SURFACE PREPARATION:
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. APAGAR PU Sealant adheres without primers and/or activators. However, for optimum adhesion and critical, high-performance applications, such as on multi-story buildings, highly stressed joints, extreme weather exposure or water immersion.

APPLICATION:

Cut tip of cartridge/ sausage with a sharp knife. Cut nozzle at 45°angle to desire bead-width & apply to substrate with cartridge / sausage gun. Firmly extrude the sealant into slot ensuring complete contact with joint faces. The sealant should be tooled shortly after application before skin forms to ensure good contact with joint substrates. Use approved backing material for joints over 10mm deep. Uncured sealant can be cleaned up with mineral spirits.

LIMITATIONS:

• APAGAR PU Sealant should not be used for: areas subject to continuous chlorinated water immersion, such as swimming pools, spa etc.
• Constant immersed in salt water.
• PE, PP, Teflon, Neoprene & bituminous surfaces.
• Glazing applications
• Painted with alkyd resin paint because it will inhibit the curing of the paint
• Used in trafficable joints greater than 10mm width APAGAR PU Sealant may be over- painted with water-based paints, however due to the large number of coatings available, it is advisable to carry out a compatibility test before application. For alkyd paints a suitable water-based undercoat must be used.
HEALTH & SAFETY:
Keep out of reach from children. Before handling, read both the product and material safety data sheet for detailed use and health information.
SHELF LIFE:
12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommend temperature between +5°C to 25°C conditions.
STANDARDS:
APAGAR PU Sealant complies with the Requirement
• ASTM C 920
• ISO 9001& ISO 14001
• ISO 9001: 2015
• ISO 14001: 2015
• IFTF 16949: 2016
STORAGE:
Store in a cool, dry place. away from direct sunlight and moisture. Storage temperature to be below 25°C
PACKING:
APAGAR PU Sealant is supplied in 600ml Al foil sausage packed in box of 20 pcs & 310ml plastic cartridge packed in box of 25 pcs.

For more Details please download:Technical Data Sheet