Soundlag

Add to quote
Categories: , Tags: ,

Please contact us before placing order.

Dispatch Time: - 10 to 15 days from date of receipt of Payment.

Delivery Time: - As per actual.

Transport Cost: - Transport cost on "To Pay Basis" and extra.

Replacement / Refund Policy: - Goods Once sold will not be replaced and/or no refunds shall be made.

Foam-based pipe and duct lagging

Soundlag is a highly flexible foam-based composite acoustic pipe lagging product. It was developed to reduce breakout noise from wastewater pipes, valves, fan housings and ductwork in commercial, industrial and residential buildings. The product range complies to international fire standards to meet fire safety demands in buildings. All Soundlag products are also equipped with a aluminium foil facing that achieves a Class 0 rating. Soundlag 4525C provides an optimal soundproofing solution for those seeking compliance to BCA (Building Code of Australia) F5.6 requirements for habitable and nonhabitable rooms. Based on test results, Soundlag™ 4525C can offer a signifcantly higher performance of up to 5 dB(A) compared to low noise pipe products especially in areas with no ceiling or with penetrations. The highly dense flexible mass layer delivers excellent sound reduction properties. Soundlag’s decoupling layer breaks the vibration path between the substrate and the mass barrier, allowing the vinyl wrap to remain flexible -optimising performance.

Pyrotek Soundlag is available in a variety of compositions to meet customer requirement. Barrier weights are available in 3 kg/m2 to 5 kg/m2 with convoluted foam, plain foam, polyester or glass wool backing in thicknesses ranging from 6 mm to 50 mm.

Applications

  • Wastewater pipes• Hydraulic pipes• Compressor and pump wraps• HVAC• Fan housings

Features

  • Better performance - up to 5 dB(A) with Soundlag 4525C compared to low noise pipe products without ceiling or areas with penetrations.• Class 0 aluminium foil facing• Tested to AS/NZS 1530.3 with excellent flame resistance (4525C)• Soundlag range complies to international fre standards• Broad operating temperature range• Reduces the noise in hydraulic and wastewater pipes by up to 25.2 dB(A)• Free from odour producing oils and bitumen• Contain no ozone depleting substances• Choice of blue convoluted foam, grey plain foam, polyester or glass wool• Simple to install - can be cut to size• Easy to bond - matching Tape ALR or equivalent• Endorsed and tested by leading acoustic consultants and engineers.

SPECIFICATIONS

Colour Silver (Aluminium foil facing) Blue convoluted (Soundlag 4525C) Plain grey foam (Soundlag 4512)
Available Standard roll size: 1.35 m x 5 m (4.4 ft x 16.4 ft) Various roll sizes available including: 0.675 m x 5 m (2.2 ft x 16.4 ft), 1.35 m x 3 m (4.4 ft x 9.8 ft), and 1.35 m x 20 m (4.4 ft x 66 ft)

Installation

Soundlag is easy and simple to install without specialist tools or trades.

HOW TO APPLY SOUNDLAG USING TAPE

  1. Tape ALR is easy to tear by hand.
  1. Remove the release liner backing
  2. Position tape centrally over the sections to be joined and firmly press along the entire tape surface.
  3. Wipe or rub with firm pressure across the tape with a cloth or blade to smooth out any air bubbles or buckles. Do not over-stretch the tape when applying, as this will create buckles and voids in the contact area.

All joints along longitudinal pipe sections must be fitted with an overlap of adjoining segments. Overlapped sections must then be taped and sealed with ‘Tape ALR’ or equal. A strip of 30 mm foam can be removed along one or both edges as required to provide for an overlap at joints.

If you require any further information, feel free to contact us on +91 8928868742

Related products

×